M5-0.80 x 20mm Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel Quantity: 500 pcs from other stores
-
M5-0.80 x 20mm Machine Screws ...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Flat Head 90 degree tap...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.
more
-
M5-0.80 x 20mm Machine Screws ...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Flat Head 90 degree tap...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.
more
-
M5-0.80 x 20mm Machine Screws ...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Pan Head. Pan heads are...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used...
more
-
M5-0.80 x 20mm Machine Screws ...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Pan Head. Pan heads are...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Pan Head. Pan heads are slightly rounded with short vertical sides. This general purpose head has a flat bearing surface with a short disc-like body and a slightly rounded top surface. Can be used...
more
-
M5-0.80 x 20mm Machine Screws ...
Thread Diameter - Pitch: M5-0.80 Length: 20mm The Flat Head Screw features a c...
Thread Diameter - Pitch: M5-0.80 Length: 20mm The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener...
more
-
M5-0.80 x 20mm Machine Screws ...
Thread Diameter - Pitch: M5-0.80 Length: 20mm The Flat Head Screw features a c...
Thread Diameter - Pitch: M5-0.80 Length: 20mm The Flat Head Screw features a countersunk head with a flat top surface and a cone-shaped bearing surface with a head angle of approximately 82 degrees. Used in applications where protrusion of the fastener...
more
-
ZORO SELECT U51300.031.0400 5/...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Dr...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Drive Phillips, Thread Size 5/16 In.-18, Fastener Length 4 in, Head Width 0.579 in, Head Height 0.191 in, Drive Size #4, Tensile Strength 60,000 psi, Dimensional Standards ASME...
more
-
ZORO SELECT U51300.019.0150 #1...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Dr...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Drive Phillips, Thread Size #10-24, Fastener Length 1 1/2 in, Head Width 0.362 in, Head Height 0.116 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME...
more
-
ZORO SELECT U51300.037.0150 3/...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Dr...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Drive Phillips, Thread Size 3/8 In.-16, Fastener Length 1 1/2 in, Head Width 0.717 in, Head Height 0.23 in, Drive Size #4, Tensile Strength 60,000 psi, Dimensional Standards...
more
-
ZORO SELECT 2AE11 #10-32 x 1-1...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Dr...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Drive Phillips, Thread Size #10-32, Fastener Length 1 1/4 in, Head Width 0.362 in, Head Height 0.116 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME...
more
-
ZORO SELECT U51300.025.0250 1/...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Dr...
Machine Screw, Head Type Flat, Material 18-8 Stainless Steel, Finish Plain, Drive Phillips, Thread Size 1/4 In.-20, Fastener Length 2 1/2 in, Head Width 0.477 in, Head Height 0.153 in, Drive Size #3, Tensile Strength 60,000 psi, Dimensional Standards...
more
-
M5-0.80 x 20mm Machine Screws ...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Flat Head 90 degree tap...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.
more
-
M5-0.80 x 20mm Machine Screws ...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Flat Head 90 degree tap...
Thread Diameter-Pitch: M5-0.80 Length: 20mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.
more
-
M5-0.80 x 60mm Machine Screws ...
Thread Diameter-Pitch: M5-0.80 Length: 60mm Head Type: Flat Head 90 degree tap...
Thread Diameter-Pitch: M5-0.80 Length: 60mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.
more
-
M5-0.80 x 10mm Machine Screws ...
Thread Diameter-Pitch: M5-0.80 Length: 10mm Head Type: Flat Head 90 degree tap...
Thread Diameter-Pitch: M5-0.80 Length: 10mm Head Type: Flat Head 90 degree taper - Screw head lays flush with the installation surface. Flat heads are countersunk (cone shaped under the head) with a flat top.
more
Items per page