ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing...ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as...more
WashingtonAlloy Gasless Wire E71T-GS is an all-position self-shielded flux-co...Washington Alloy Gasless Wire E71T-GS is an all-position self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge (using .030) without burn-through. Gasless Wire E71T-GS is...more
ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing...ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as...more
316L is similar to USA 316 but contains an average .02% carbon producing a wel...316L is similar to USA 316 but contains an average .02% carbon producing a weld deposit with excellent resistance against intergranular corrosion caused by carbide precipitation. USA 316L is used for welding AISI types 316L 318 and 319L that may be...more
ER309L is similar to ER309 but contains an average .02% carbon to provide a we...ER309L is similar to ER309 but contains an average .02% carbon to provide a weld deposit that will offer good resistance against intergranular corrosion caused by carbide precipitation. ER309L is excellent for buttered passes and overlay work....more
USA 309 is used for welding heat-resistant AISI 309 and other straight chromiu...USA 309 is used for welding heat-resistant AISI 309 and other straight chromium grades of stainless steel where pre-heat and post-heat treatment is impossible. USA 309 wire produces sound ductile weld deposits. Other applications would include...more
USA 308 is used to weld all stainless steel AISI 200 and 300 series up to and ...USA 308 is used to weld all stainless steel AISI 200 and 300 series up to and including 308. This wire is used where resistance to corrosion impact and abrasion is required. Weld deposits will be equal or superior to the base metal.more
ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing...ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as...more
310 is used for welding types AISI 310 304 clad stainless steel ferritic and m...310 is used for welding types AISI 310 304 clad stainless steel ferritic and martensitic chromium steels and for stainless steel overlay work on mild and carbon steels. 310 welding wire produces weld deposits of high strength and high resistance to...more
USA 308 is used to weld all stainless steel AISI 200 and 300 series up to and ...USA 308 is used to weld all stainless steel AISI 200 and 300 series up to and including 308. This wire is used where resistance to corrosion impact and abrasion is required. Weld deposits will be equal or superior to the base metal.more
Weldcote Metals ER70S-6 contains higher levels of manganese and silicon than t...Weldcote Metals ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale produces the highest deposit strength of all the carbon steel MIG wires....more