1-80
of
2,887
results
-
CABLOFIL EZBN1/4EZ Screw And F...Cable Tray Screw And Flange Nut, For Use With Bends and Tees, Bolting Turns, C... Cable Tray Screw And Flange Nut, For Use With Bends and Tees, Bolting Turns, Cablofil Wiremesh Cable Trays, Finish Zinc Plated, Material Steel, Height 1 in, Length 3/4 in, Width 2 3/4 in, For Tray Width 4 in, 6 in, 8 in, 12 in, 18 in, 20 in, 22 in, 24... more
-
DEWALT 06984-PWR Power-Bolt Sl...Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Overall Len... Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Overall Length 5 in, Thread Size 3/8 In.-16, Drive Type Socket, Head Type Flat, Nut Width Not Applicable, Washer Outside Diameter 1 in, Material Steel, Material Grade/Class Not Graded,... more
-
SENCO W3075YXC Collated Concre...Concrete Nails,3/4 In. L,Zinc Plated,PK1000, Overall Length 3/4 in, Shank Diam... Concrete Nails,3/4 In. L,Zinc Plated,PK1000, Overall Length 3/4 in, Shank Diameter 0.109 in, Gauge 12 ga, Product Type Concrete Nails, Material Steel, Finish Zinc Plated, Head Type Flat, Shank Type Smooth, Point Type Pinched, Collation Type Plastic,... more
-
DEWALT 03781-PWR Drive Nail Dr...Hammer Drive Pin Anchor, Anchor Diameter 1/2 in, Overall Length 3 in, Anchor M... Hammer Drive Pin Anchor, Anchor Diameter 1/2 in, Overall Length 3 in, Anchor Material Steel, Finish Zinc Plated, Head Type Round, Head Height 0.25 in, Head Diameter 1 in, Drill Bit Size 1/2 in, Minimum Installation Depth 2 5/8 in, Drive Pin Anchor Type... more
-
ZORO SELECT B38205.037.0001 Fl...Flat Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.21.1, SAE, M... Flat Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.21.1, SAE, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 3/8 in, Inside Diameter 0.406 in, Outside Diameter 13/16 in, Maximum Thickness 0.063 in,... more
-
CAMPBELL CHAIN & FITTINGS T014...Straight Chain, Chain Type Proof Coil Chain, Material Carbon Steel, Lifting Ca... Straight Chain, Chain Type Proof Coil Chain, Material Carbon Steel, Lifting Capability Not for Lifting, Working Load Limit 4,500 lb, Chain Grade 30, Trade Size 1/2 in, Link Inside Length 1 3/4 in, Link Type Straight, Link Inside Width 3/4 in, Overall... more
-
NORD-LOCK 2403 Wedge Lock Wash...Lock Washer, Finish Zinc Plated, Material Steel, For Screw Size 3/4 in, Inside... Lock Washer, Finish Zinc Plated, Material Steel, For Screw Size 3/4 in, Inside Diameter 0.779 in, Outside Diameter 1.209 in, Maximum Thickness 0.219 in, Minimum Thickness 0.219 in, Color Silver, Material Grade/Class Not Graded, Pack Size Small Pack,... more
-
ITW BEE LEITZKE WWG-DISP-CP120...Pin Assortment,1200 pcs,10 Sizes, Manufacturer Location Globally Sourced, Made... Pin Assortment,1200 pcs,10 Sizes, Manufacturer Location Globally Sourced, Made in North America No, Product Type Cotter Pin Assortment, Material Grade/Class 1008, Standards ANSI B 18.8.1, ASME B18.8.1, Number of Pieces 1,200, Number of Sizes 10, Finish... more
-
ZORO SELECT Z9671 Thick Fender...Thick Fender Washer, Flat Washer Type Oversized, Material Steel, Material Grad... Thick Fender Washer, Flat Washer Type Oversized, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 5/8 in, Inside Diameter 0.688 in, Outside Diameter 3 in, Maximum Thickness 0.125 in, System of Measurement Inch, Minimum... more
-
ZORO SELECT 2ZDH7 Chain,Dbl,Zi...Double Loop Chain, Chain Type Not Applicable, Material Steel, Lifting Capabili... Double Loop Chain, Chain Type Not Applicable, Material Steel, Lifting Capability Not for Lifting, Working Load Limit 255 lb, Trade Size 02/0, Link Inside Length 2 1/4 in, Link Type Double Loop, Overall Length 100 ft, Links per Foot 6, Compatible... more
-
ZORO SELECT 1XPC2 Paddle Latch...Paddle Latch, Push-to-Close, Push, Adjustable No, Locking, Catch/Latch Materia... Paddle Latch, Push-to-Close, Push, Adjustable No, Locking, Catch/Latch Material Steel, Catch/Latch Finish Zinc, Catch/Latch Height 4 1/4 in, Catch/Latch Width 5 1/2 in, Catch/Latch Depth 7/8 in, Grip 59/64 in, Mounting Hole Dia. 3/16 in more
-
ABUS 12KS Chain & Sleeve 2' Se...Security Chains, Cable Coating Vinyl, Chain Length 2 ft, Chain Diameter 1/2 in... Security Chains, Cable Coating Vinyl, Chain Length 2 ft, Chain Diameter 1/2 in, Steel, Chain Finish Zinc, Chain Cover Material Nylon, Chain Brand ABUS, Body Color Black, Weather Resistant Yes, Environment Indoor and Outdoor, Includes Chain Cover Yes,... more
-
PASLODE 650285 Collated Finish...Straight Finish Nails,2 In. L,PK2000, Overall Length 2 in, Shank Diameter 2 in... Straight Finish Nails,2 In. L,PK2000, Overall Length 2 in, Shank Diameter 2 in, Gauge 16 ga, Product Type Finishing Nails, Material Steel, Finish Galvanized, Penny Size 6D, Head Type Brad, Head Diameter Not Applicable, Shank Type Smooth, Point Type... more
-
ITW BEE LEITZKE WWG-DISP-CP550...Pin Assortment,550 pcs,7 Sizes, Manufacturer Location Globally Sourced, Made i... Pin Assortment,550 pcs,7 Sizes, Manufacturer Location Globally Sourced, Made in North America No, Product Type Cotter Pin Assortment, Material Grade/Class 1008, Standards ANSI B 18.8.1, ASME B18.8.1, Number of Pieces 550, Number of Sizes 7, Finish Zinc... more
-
ZORO SELECT 4CAT2 Wing Nut, 3/...Wing Nut, Material Zinc Alloy, Material Grade/Class Not Graded, Finish Zinc Pl... Wing Nut, Material Zinc Alloy, Material Grade/Class Not Graded, Finish Zinc Plated, Lock Type Nylon Insert, Wing Shape Square, Thread Size 3/8 In.-16, Dimensional Standards ASME B18.17, Material Quality Standards ASME B18.6.9, Zamac Type 3, Material... more
-
ZORO SELECT U08280.025.0600 La...Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/4 In., Fa... Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/4 In., Fastener Length 6 in, Threads per Inch 10, Thread Style Partially Threaded, Minimum Thread Length 3 19/32 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... more
-
ITW BEE LEITZKE WWG-DISP-CP420...Pin Assortment,420 pcs,6 Sizes, Manufacturer Location Globally Sourced, Made i... Pin Assortment,420 pcs,6 Sizes, Manufacturer Location Globally Sourced, Made in North America No, Product Type Cotter Pin Assortment, Material Grade/Class 1008, Standards ANSI B 18.8.1, ASME B18.8.1, Number of Pieces 420, Number of Sizes 6, Finish Zinc... more
-
ZORO SELECT 20311 Fully Thread...Fully Threaded Rod, Material Grade/Class Grade 2, Material Steel, Finish Zinc ... Fully Threaded Rod, Material Grade/Class Grade 2, Material Steel, Finish Zinc Plated, Thread Size 1 In.-14, Overall Length 3 ft, Tensile Strength 60,000 psi, System of Measurement Inch, Thread Direction Right Hand, Includes Nuts No, Nut Width Not... more
-
ZORO SELECT 4CAR7 Wing Nut, 1/...Wing Nut, Material Zinc Alloy, Material Grade/Class Not Graded, Finish Zinc Pl... Wing Nut, Material Zinc Alloy, Material Grade/Class Not Graded, Finish Zinc Plated, Lock Type Nylon Insert, Wing Shape Square, Thread Size 1/4 In.-20, Dimensional Standards ASME B18.17, Material Quality Standards ASME B18.6.9, Zamac Type 3, Material... more
-
ZORO SELECT 250383BG Coupling ...Coupling Nut, Material Grade/Class Grade 2, Material Steel, Finish Zinc Plated... Coupling Nut, Material Grade/Class Grade 2, Material Steel, Finish Zinc Plated, Thread Size 9/16 In.-18, Thread Style Fully Threaded, Hex Width 13/16 in, Overall Length 2 1/8 in, Dimensional Standards ASME B18.2.2, RoHS Compliant, Material Quality... more
-
ROTOR CLIP HO-112ST ZD Interna...Retaining Ring,Internal,0.05 in Thk,PK50, System of Measurement Inch, Location... Retaining Ring,Internal,0.05 in Thk,PK50, System of Measurement Inch, Location Style Internal, Thickness 0.05 in, Fits Shaft Diameter Not Applicable, For Bore Diameter 1 1/8 in, Fits Groove Diameter 1.197 in, Fits Groove Width 0.056 in, Fits Groove... more
-
MALCO HW8X3/4ZT Sheet Metal Sc...Self-Piercing Screw, Head Type Hex Washer, Finish Zinc Plated, Material Steel,... Self-Piercing Screw, Head Type Hex Washer, Finish Zinc Plated, Material Steel, Screw Size #8, Fastener Length 3/4 in, Head Width 0.375 in, Head Height 0.109 in, Drive Size 1/4 in, Dimensional Standards RoHS Compliant, Pack Size Small, Minimum Head... more
-
ZORO SELECT 204606BG Coupling ...Coupling Nut, Material Grade/Class Grade 5, Material Steel, Finish Zinc Plated... Coupling Nut, Material Grade/Class Grade 5, Material Steel, Finish Zinc Plated, Thread Size 3/8 In.-24, Thread Style Fully Threaded, Hex Width 5/8 in, Overall Length 1 3/4 in, Dimensional Standards ASME B18.2.2, RoHS Compliant, Material Quality... more
-
ZORO SELECT U08280.031.0600 La...Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 5/16 In., F... Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 5/16 In., Fastener Length 6 in, Threads per Inch 9, Thread Style Partially Threaded, Minimum Thread Length 3 51/64 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... more
-
ITW BEE LEITZKE WWG-DISPBPXZ27...Pin Assortment,276 pcs,9 Sizes, Manufacturer Location Made in USA*, Made in No... Pin Assortment,276 pcs,9 Sizes, Manufacturer Location Made in USA*, Made in North America Yes, Product Type Hair Pin Assortment, Material Grade/Class Ungraded, Standards ANSI B 18.8.1, ASME B18.8.1, Number of Pieces 276, Number of Sizes 9, Finish Zinc... more
-
ZORO SELECT 2ZDH8 Chain,Dbl,Zi...Double Loop Chain, Chain Type Not Applicable, Material Steel, Lifting Capabili... Double Loop Chain, Chain Type Not Applicable, Material Steel, Lifting Capability Not for Lifting, Working Load Limit 305 lb, Trade Size 3/0, Link Inside Length 2 3/8 in, Link Type Double Loop, Overall Length 100 ft, Links per Foot 5, Compatible Fitting... more
-
-
RED HEAD 5014901 E-Z Toggles T...Toggle Bolt Anchor, Toggle Anchor Type Toggle Bolt Anchor, System of Measureme... Toggle Bolt Anchor, Toggle Anchor Type Toggle Bolt Anchor, System of Measurement Inch, Thread Size #8-32, Screw Length 2 1/8 in, Usable Length 1/2 in, Material Zinc, Finish Plain, Compatible Material Drywall, Maximum Material Thickness 1/2 in, Package... more
-
ZORO SELECT U04122.150.0001 He...Hex Nut, Hex Type Standard Hex, Finish Zinc Yellow, Material Grade/Class Grade... Hex Nut, Hex Type Standard Hex, Finish Zinc Yellow, Material Grade/Class Grade 8, Material Steel, Thread Size 1 1/2 In.-6, Hex Width 2 1/4 in, Hex Height 1 9/32 in, Manufacturer Location Globally Sourced, Dimensional Standards ASME B18.2.2, System of... more
-
ZORO SELECT U38210.037.0300 Fe...Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1... Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 3/8 in, Inside Diameter 0.406 in, Outside Diameter 3 in, Maximum Thickness 0.065 in, System... more
-
ZORO SELECT U38210.050.0300 Fe...Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1... Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 1/2 in, Inside Diameter 0.531 in, Outside Diameter 3 in, Maximum Thickness 0.065 in, System... more
-
DEWALT 06335-PWR Steel Dropin ...Expansion Anchor, Anchor Diameter 1/4 in, Overall Length 5/8 in, Thread Size 1... Expansion Anchor, Anchor Diameter 1/4 in, Overall Length 5/8 in, Thread Size 1/4 In.-20, Thread Depth 0.375 in, Thread Type Coarse, Material Steel, Finish Zinc Plated, Flange Style Flanged, Drill Bit Size 3/8 in, Minimum Hole Depth 5/8 in, System of... more
-
ZORO SELECT B31702.021.0075 Se...Self Drilling Tapping Screw, Finish Zinc Plated, Material Steel, Head Type Hex... Self Drilling Tapping Screw, Finish Zinc Plated, Material Steel, Head Type Hex Washer, Drive External Hex, Screw Size #12, Fastener Length 3/4 in, Drill Point Size 3, Drill Tip Length 23/64 in, Maximum Drilling Thickness 0.187 in, Head Width 0.312 in,... more
-
SENCO W3125YXC Collated Concre...Concrete Nails,1.25 In. L,PK1000, Overall Length 1 1/4 in, Shank Diameter 0.10... Concrete Nails,1.25 In. L,PK1000, Overall Length 1 1/4 in, Shank Diameter 0.109 in, Gauge 12 ga, Product Type Concrete Nails, Material Steel, Finish Zinc Plated, Penny Size 3D, Head Type Flat, Shank Type Smooth, Point Type Pinched, Collation Type... more
-
CAMPBELL CHAIN & FITTINGS T014...Straight Chain, Chain Type Proof Coil Chain, Material Carbon Steel, Lifting Ca... Straight Chain, Chain Type Proof Coil Chain, Material Carbon Steel, Lifting Capability Not for Lifting, Working Load Limit 800 lb, Chain Grade 30, Trade Size 3/16 in, Link Inside Length 1 in, Link Type Straight, Link Inside Width 3/8 in, Overall Length... more
-
ZORO SELECT B70520.025.0300 Ma...Screw Anchor, Anchor Diameter 1/4 in, Overall Length 3 in, Head Type Hex, Driv... Screw Anchor, Anchor Diameter 1/4 in, Overall Length 3 in, Head Type Hex, Drive Type External Hex, Material Steel, Finish Zinc Plated, Material Grade/Class Case Hardened, Compatible Material Concrete, Drill Bit Size 1/4 in, Screw Anchor Type Concrete... more
-
ZORO SELECT B38210.025.0150 Fe...Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1... Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 1/4 in, Inside Diameter 0.281 in, Outside Diameter 1 1/2 in, Maximum Thickness 0.065 in,... more
-
DEWALT DCN890225 Collated Conc...Concrete Nails,2 1/4 In. L,PK500, Overall Length 2 1/4 in, Shank Diameter 0.13... Concrete Nails,2 1/4 In. L,PK500, Overall Length 2 1/4 in, Shank Diameter 0.137 in, Gauge 0.137 in, Product Type Concrete Nails, Material Steel, Finish Zinc Plated, Penny Size Not Applicable, Head Type Flat, Head Diameter 1/4 in, Shank Type Smooth,... more
-
DEWALT 6932SD-PWR Power-Bolt+ ...Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Overall Len... Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Overall Length 3 1/2 in, Thread Size Not Applicable, Drive Type External Hex, Head Type Hex, Nut Width 0.625 in, Washer Outside Diameter 1 in, Material Steel, Material Grade/Class Grade... more
-
NORD-LOCK 2373 Wedge Lock Wash...Lock Washer, Finish Zinc Plated, Material Steel, For Screw Size 8 mm, Inside D... Lock Washer, Finish Zinc Plated, Material Steel, For Screw Size 8 mm, Inside Diameter 8.4 mm, Outside Diameter 13.5 mm, Maximum Thickness 2.29 mm, Minimum Thickness 2.29 mm, Color Silver, Material Grade/Class Not Graded, Pack Size Small Pack, Rockwell... more
-
DEWALT DCN891075 Collated Conc...Concrete Nails,3/4 In. L,Zinc Plated,PK1000, Overall Length 3/4 in, Shank Diam... Concrete Nails,3/4 In. L,Zinc Plated,PK1000, Overall Length 3/4 in, Shank Diameter 0.145 in, Gauge 0.145 in, Product Type Concrete Nails, Material Steel, Finish Zinc Plated, Penny Size Not Applicable, Head Type Flat, Head Diameter 1/4 in, Shank Type... more
-
ZORO SELECT U11374.037.0001 Ja...Jam Nut, Hex Type Jam Hex, Finish Zinc Plated, Material Steel, Material Grade/... Jam Nut, Hex Type Jam Hex, Finish Zinc Plated, Material Steel, Material Grade/Class Grade 8, Thread Size 3/8 In.-24, Hex Width 9/16 in, Hex Height 15/64 in, Dimensional Standards ASME B18.2.2, System of Measurement Inch, Thread Direction Right Hand,... more
-
ZORO SELECT B08305.025.0300 Ca...Carriage Bolt, Inch, Neck Type Square, Basic Material Steel, Material Grade Gr... Carriage Bolt, Inch, Neck Type Square, Basic Material Steel, Material Grade Grade A, Fastener Finish Zinc Plated, Dia./Thread Size 1/4 In.-20, Fastener Length 3 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), ASME B18.5,... more
-
ZORO SELECT B08280.031.0400 La...Hex Head Lag Screws, Material Steel, Finish Zinc Plated, Screw Size 5/16 In., ... Hex Head Lag Screws, Material Steel, Finish Zinc Plated, Screw Size 5/16 In., Fastener Length 4 in, Threads per Inch 9, Thread Style Partially Threaded, Minimum Thread Length 2 13/32 in, Dimensional Standards ASME B18.2.1, Pack Size Bulk, System of... more
-
ZORO SELECT U30000.024.0200 Wo...Multi-Material Screw, Type Multi-Material Screw, Finish Zinc Plated, Material ... Multi-Material Screw, Type Multi-Material Screw, Finish Zinc Plated, Material Steel, Screw Size #14, Fastener Length 2 in, Drive Phillips, Drive Size #3, Head Style Flat, System of Measurement Inch, Head Type Flat, Package Quantity 200 more
-
ZORO SELECT U07415.037.0100 3/...Socket Flat Head Screw, Head Type Flat, System of Measurement Inch, Drive Type... Socket Flat Head Screw, Head Type Flat, System of Measurement Inch, Drive Type Socket, Drive Size 7/32 in, Material Steel, Finish Zinc Plated, Thread Size 3/8 In.-16, Minimum Thread Length 1 in, Fastener Length 1 in, Head Height 0.234 in, Head Diameter... more
-
ZORO SELECT U04104.031.0325 Gr...Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material... Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 8, Fastener Finish Zinc Yellow, Dia./Thread Size 5/16 In.-18, Fastener Length 3 1/4 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more
-
ZORO SELECT U38210.031.0250 Fe...Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1... Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 5/16 in, Inside Diameter 0.344 in, Outside Diameter 2 1/2 in, Maximum Thickness 0.065 in,... more
-
ZORO SELECT WWG-CLPZ-152 Clevi...Clevis Pin, Product Type Standard Clevis Pin, Material Steel, Finish Zinc Plat... Clevis Pin, Product Type Standard Clevis Pin, Material Steel, Finish Zinc Plated, Material Grade/Class Grade 1010/Grade 1018, Head Type Headed, Head Diameter 2 in, Maximum Usable Length 4 3/8 in, Maximum Hole Size 0.26 in, Minimum Hole Size 0.245 in,... more
-
ZORO SELECT 658151-PG 3/16"-24...Stove Bolt, Head Type Flat, Material Steel, Finish Zinc Plated, Drive Slotted,... Stove Bolt, Head Type Flat, Material Steel, Finish Zinc Plated, Drive Slotted, Thread Size 3/16 In.-24, Fastener Length 1 1/2 in, Head Width 0.362 in, Head Height 0.116 in, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3, Pack Size... more
-
ZORO SELECT B04114.050.0200 Gr...Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material... Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 8, Fastener Finish Zinc Yellow, Dia./Thread Size 1/2 In.-13, Fastener Length 2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more
-
ZORO SELECT B01210.075.0250 Gr...Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material... Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 5, Fastener Finish Zinc Plated, Dia./Thread Size 3/4 In.-10, Fastener Length 2 1/2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more
-
ZORO SELECT HF18120500-025P2 C...Hex Head Cap Screw, System of Measurement Metric, Basic Material Steel, Materi... Hex Head Cap Screw, System of Measurement Metric, Basic Material Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Dia./Thread Size M12-1.50, Fastener Length 50 mm, Fastener Thread Direction Right Hand, Fastener Thread Type Metric Fine,... more
-
TE-CO 54308 Plunger,Hand,Steel...Spring Plunger, Thread Size 5/8 In.-11, Thread Length 1.8200 in, Nose Shape Ch... Spring Plunger, Thread Size 5/8 In.-11, Thread Length 1.8200 in, Nose Shape Chamfered, Plunger Material Steel, Plunger Dia. 0.3800 in, Plunger Projection 1 in, Mounting Type Threaded, With Locking Plunger Yes, Body Length 2 in, Final Nose Force 5 lb,... more
-
NORD-LOCK 2376 Wedge Lock Wash...Lock Washer, Finish Zinc Plated, Material Steel, For Screw Size 12 mm, Inside ... Lock Washer, Finish Zinc Plated, Material Steel, For Screw Size 12 mm, Inside Diameter 12.5 mm, Outside Diameter 19.5 mm, Maximum Thickness 3.5 mm, Minimum Thickness 3.5 mm, Color Silver, Material Grade/Class Not Graded, Pack Size Small Pack, Rockwell... more
-
ZORO SELECT B70411.075.0850 We...Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size ... Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 3/4 In.-10, Overall Length 8 1/2 in, Thread Length 6 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/4... more
-
ZORO SELECT N01300.050.0001 He...Hex Nut, Hex Type Standard Hex, Finish Zinc Plated, Material Grade/Class Grade... Hex Nut, Hex Type Standard Hex, Finish Zinc Plated, Material Grade/Class Grade 5, Material Steel, Thread Size 1/2 In.-13, Hex Width 3/4 in, Hex Height 7/16 in, Manufacturer Location Made in USA*, Dimensional Standards ASME B18.2.2, System of... more
-
ZORO SELECT N01300.037.0001 He...Hex Nut, Hex Type Standard Hex, Finish Zinc Plated, Material Grade/Class Grade... Hex Nut, Hex Type Standard Hex, Finish Zinc Plated, Material Grade/Class Grade 5, Material Steel, Thread Size 3/8 In.-16, Hex Width 9/16 in, Hex Height 21/64 in, Manufacturer Location Made in USA*, Dimensional Standards ASME B18.2.2, System of... more
-
ZORO SELECT N01300.025.0001 He...Hex Nut, Hex Type Standard Hex, Finish Zinc Plated, Material Grade/Class Grade... Hex Nut, Hex Type Standard Hex, Finish Zinc Plated, Material Grade/Class Grade 5, Material Steel, Thread Size 1/4 In.-20, Hex Width 7/16 in, Hex Height 7/32 in, Manufacturer Location Made in USA*, Dimensional Standards ASME B18.2.2, System of... more
-
ZORO SELECT M07160.120.0070 M1...Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive... Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 10 mm, Material Steel, Material Grade/Class Class 8, Finish Zinc Plated, Thread Size M12-1.75, Minimum Thread Length 50 mm, Fastener Length 70 mm,... more
-
ZORO SELECT M07141.080.0020 M8...Socket Head Cap Screw, Head Type Flanged Button, System of Measurement Metric,... Socket Head Cap Screw, Head Type Flanged Button, System of Measurement Metric, Drive Type Socket, Drive Size 6 mm, Material Steel, Material Grade/Class Class 10.9, Finish Zinc Plated, Thread Size M8-1.25, Minimum Thread Length 20 mm, Fastener Length 20... more
-
ZORO SELECT M01210.140.0070 Cl...Hex Head Cap Screw, System of Measurement Metric, Basic Material Steel, Materi... Hex Head Cap Screw, System of Measurement Metric, Basic Material Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Dia./Thread Size M14-2.00, Fastener Length 70 mm, Fastener Thread Direction Right Hand, Fastener Thread Type Metric Coarse,... more
-
ZORO SELECT U08280.037.0600 La...Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 3/8 In., Fa... Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 3/8 In., Fastener Length 6 in, Threads per Inch 7, Thread Style Partially Threaded, Minimum Thread Length 3 19/32 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... more
-
ZORO SELECT CPS1KZL8GR Flat an...Washer Assortment, Dimensional Standards ASME B18.21.1, Finish Zinc Plated, In... Washer Assortment, Dimensional Standards ASME B18.21.1, Finish Zinc Plated, Includes (14) Washers 1/2 in, (15) Washers 1/2 in, (16) Washers 7/16 in, (20) Washers 3/8 in, (20) Washers 5/16 in, (20) Washers 7/16 in, (25) Washers 1/4 in, (25) Washers 3/8... more
-
ZORO SELECT CPS1YE84GR Standar...Flat Washer Assortment, Finish Zinc Plated, Includes (100) Washers 3/16 in, (1... Flat Washer Assortment, Finish Zinc Plated, Includes (100) Washers 3/16 in, (12) Washers 1/2 in, (140) Washers #8, (160) Washers #6, (30) Washers 3/8 in, (5) Washers 1 in, (6) Washers 3/4 in, (60) Washers 1/4 in, (8) Washers 5/8 in, 5/16 in, 7/8 in,... more
-
ZORO SELECT CPS1LAA1GR Fender ...Washer Assortment, Dimensional Standards ASME B18.21.1, Finish Zinc Plated, In... Washer Assortment, Dimensional Standards ASME B18.21.1, Finish Zinc Plated, Includes (10) Washers 1/4 in x 1 1/4 in, (10) Washers 3/16 in x 1 1/4 in, (10) Washers 3/8 in x 1 1/2 in, (10) Washers 3/8 in x 1 1/4 in, (10) Washers 5/16 in x 1 1/2 in, (10)... more
-
ZORO SELECT 0-EF-816C87- Wing ...Wing Nut, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Th... Wing Nut, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Thread Size 3/8 In.-16, Maximum Wing Span 3 in, Overall Height 0.75 in, Base Diameter 1 in, System of Measurement Inch, Pack Size Small Pack, Rockwell Hardness HB 82-92,... more
-
TE-CO 52208 Plunger,Spring,Ste...Spring Plunger, Thread Size 1/2 In.-13, Thread Length 1-1/4 in, Plunger Materi... Spring Plunger, Thread Size 1/2 In.-13, Thread Length 1-1/4 in, Plunger Material Steel, Plunger Dia. 0.2480 in, Plunger Projection 1/4 in, Mounting Type Threaded, Body Length 1-1/4 in, Final Nose Force 9.3 lb, Initial Nose Force 2.7 lb, Overall Length... more
-
ZORO SELECT U08280.050.0600 La...Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/2 In., Fa... Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/2 In., Fastener Length 6 in, Threads per Inch 6, Thread Style Partially Threaded, Minimum Thread Length 3 1/2 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... more
-
ZORO SELECT U08361.025.0100 El...Inch, Elevator Bolt, Head Type - Bolts Flat, Steel, Material Grade Grade A, Fa... Inch, Elevator Bolt, Head Type - Bolts Flat, Steel, Material Grade Grade A, Fastener Finish Zinc Plated, Dia./Thread Size 1/4 In.-20, Fastener Length 1 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry... more
-
ZORO SELECT U04114.050.0400 Gr...Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material... Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 8, Fastener Finish Zinc Yellow, Dia./Thread Size 1/2 In.-13, Fastener Length 4 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more
-
ZORO SELECT U04114.037.0225 Gr...Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material... Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 8, Fastener Finish Zinc Yellow, Dia./Thread Size 3/8 In.-16, Fastener Length 2 1/4 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more
-
ZORO SELECT U01252.050.0200 Gr...Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material... Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 5, Fastener Finish Zinc Plated, Dia./Thread Size 1/2 In.-20, Fastener Length 2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNF (Fine),... more
-
ZORO SELECT U01210.031.0100 Gr...Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material... Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 5, Fastener Finish Zinc Plated, Dia./Thread Size 5/16 In.-18, Fastener Length 1 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more
-
ZORO SELECT U07041.031.0125 5/...Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive T... Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 1/4 in, Material Steel, Finish Zinc Plated, Thread Size 5/16 In.-24, Fastener Length 1 1/4 in, Head Height 0.312 in, Head Diameter 0.468 in, Pack Size... more
-
ZORO SELECT U28100.019.0300 Sh...Tapping Sheet Metal Screw, Head Type Hex Washer, Finish Zinc Plated, Material ... Tapping Sheet Metal Screw, Head Type Hex Washer, Finish Zinc Plated, Material Steel, Screw Size #10, Fastener Length 3 in, Head Width 0.362 in, Head Height 0.12 in, Dimensional Standards ASME B18.6.3, Pack Size Small, Minimum Head Width 0.333 in,... more
-
ZORO SELECT M01210.200.0110 Cl...Hex Head Cap Screw, System of Measurement Metric, Basic Material Steel, Materi... Hex Head Cap Screw, System of Measurement Metric, Basic Material Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Dia./Thread Size M20-2.50, Fastener Length 110 mm, Fastener Thread Direction Right Hand, Fastener Thread Type Metric Coarse,... more
-
ZORO SELECT HCI205008000-025P ...Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material... Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Dia./Thread Size 1/2 In.-13, Fastener Length 8 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more
-
ZORO SELECT U08280.050.0250 La...Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/2 In., Fa... Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/2 In., Fastener Length 2 1/2 in, Threads per Inch 6, Thread Style Partially Threaded, Minimum Thread Length 1 1/2 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... more
-
ZORO SELECT U28100.031.0075 Sh...Sheet Metal Screw, Head Type Hex Washer, Finish Zinc Plated, Material Steel, S... Sheet Metal Screw, Head Type Hex Washer, Finish Zinc Plated, Material Steel, Screw Size 5/16 In., Fastener Length 3/4 in, Head Width 0.579 in, Head Height 0.23 in, Dimensional Standards ASME B18.6.3, Pack Size Small, Minimum Head Height 0.208 in,... more
Ads related to Home Hardware
Shopping for the best deal on Home Hardware, Zinc, Zoro Home Hardware - Read product reviews, compare prices and store ratings.