close window
Please make sure your minimum price is less than your maximum price.
Item Mars-BL4850-340kv Voltage 9.6-25.2V Power(W) 1650W Lipo 6S Recommened Prop (inch) 14*7 Turns 16T shaft Diameter D2(mm) 6.0 shaftlenght L2(mm) 31.2 Diameter ...
Traxxas Clutch Bell 16T, Washer, 5mm ECli
HPI Racing Racing Clutch Bell 16T
This is the optional 16 tooth clutch bell for the HPI Savage Monster Truck. The larger the clutch bell, the more top end speed the buggy will have, but it will be ...
This is a replacement Hot Bodies 16 tooth clutch bell, and is intended for use with the Hot Bodies D8 1/8 Buggy.
Traxxas 16 tooth 32 pitch pinion gear is made of machined steel. Designed for a 3mm shaft. INCLUDES: One 16 tooth Pinion Gear One 3 x 4mm Set Screw COMMENTS: This ...
Traxxas direct replacement clutch gear is constructed of black steel. INCLUDES: One 16 tooth gear (standard) This is the 1st speed gear only. Requires: Installation ...
Losi Clutch Bell 16T: 8B, 8T
Ofna Racing Clutchbell 16T,w/o BB
This is the optional 16 tooth clutch bell for the Losi 8IGHT buggy. The clutch bell sits over the clutch shoes, and will be engaged when the engine rpm's increase. ...
This is the optional replacement 16 tooth clutch bell for the OFNA line of buggies and truggies. The smaller the clutch bell, the more bottom end acceleration the ...
This is a standard 16T vented 1/8th scale buggy and monster truck clutch bell from OFNA. This bell is vented to allow air to help cool the clutch bell and clutch ...
Robinson Racing Products Extra Hard Spur, 40T & Clutch Bell, 16T: Revo
This is a 40 tooth spur gear and 16 tooth clutch bell combo from Robinson Racing Products for the Traxxas Revo 3.3 Monster Truck. All Spur/Clutchbell combos are ...
Racers Edge 16T 1/8 Super Clutch Bell
Traxxas Clutch Bell, 16T: NST,NRU
This is a replacement MS Heli 16 tooth Pinion, and is intended for use with the MS Heli Mini Protos 450 class helicopter. This pinion gear is recommended for sport, ...
This is a MS Heli 16 tooth motor pinion, and is intended for use with the MS Heli Protos 500 Helicopters. Includes: (1) 16T Motor Pinion (2) 6x10x2.5 Bearings (1) ...
This is a Tekno RC 16 tooth, 5mm Bore, hardened steel, long shank Mod1 pinion gear. These hardened steel pinions are double hardened and feature two M4 setscrew ...
This is an Axial Hardened Steel, Vented Clutch Bell. These bells are vented for lighter weight and to cool the clutch, for less rotating mass and better clutch ...
(Sponsored Links)